Commercial dishwasher repair
Commercial dishwasher repair covers under-counter, pass-through and conveyor machines. Wash and drain pumps, heating elements, blocked jets, scale and dosing faults are the common causes, and most are fixed on the first visit.
A wash-up that stops takes the kitchen down with it within the hour. Scale is the usual culprit on Gauteng water: it blocks jets, coats elements and shortens pump life, and it is entirely preventable on a maintenance schedule.
Wash-up
What we cover
- Under-counter glass and dishwashers
- Pass-through hood machines
- Rack conveyor machines
- Utensil and pot washers
- Water softeners and filtration
- Rinse aid and detergent dosing
- Drain and waste pumps
- Booster heaters
Common faults and what they mean
| Symptom | Likely cause | Usual fix |
|---|---|---|
| Plates coming out dirty | Blocked wash jets or a failing wash pump | Strip and descale the arms, or replace the pump |
| Machine not filling | Inlet valve, float switch or pressure switch | Replace the faulty component |
| Water not heating | Element, thermostat or a scaled booster | Replace the element, descale the booster |
| Glasses clouding over time | Rinse aid dosing or water hardness | Recalibrate dosing, service the softener |
| Machine will not drain | Blocked waste or a failed drain pump | Clear the waste line, replace the pump |
A cracked or corroded wash tank cannot be repaired to a food-safe standard, and we will say so rather than patch it.
Commercial dishwasher repair: common questions
Ask us directlyAlmost always blocked wash jets or a weakening wash pump. Scale builds inside the arms on hard water and narrows the spray, so plates come out streaked or gritty even though the cycle completes. Descaling the arms often restores it without new parts.
The callout is R350, waived when you assign the repair. Pump, element and dosing repairs typically land within R850 to R2 500. Control board replacements sit at the upper end, and we quote the exact figure before ordering anything.
Yes. Pass-through hood machines and rack conveyors are routine work, covering wash and rinse pumps, booster heaters, curtains, rack drives and control boards.
Yes, and it is worth scheduling rather than waiting for a fault. Descaling protects the element, pump and jets at once, which is why it sits in most of our maintenance plans for wash-up areas.
Related services
This repair is part of our full commercial appliance service across Gauteng. Pick the page closest to what you need.